Lasers could help cut CO2 emissions from Maine’s paper and pulp mills
This story was first published by Energy News Network. A Massachusetts university is developing technology that aims to use lasers to drastically cut emissions and energy use from Maine’s paper and pulp industry. Worcester Polytechnic Institute recently received a $2.75 million U.S. Department of Energy grant to help ready the industrial drying technology for commercial use. “We are all excited about this — this is potentially a groundbreaking technology,” said Jamal Yagoobi, founding director of the institute’s Center for Advanced Research in Drying. In Maine, the paper and pulp business generates about 1 million metric tons of carbon dioxide emissions each year, roughly half of the state’s industrial emissions. Much of these emissions result from the process of drying mashed, pressed, and rolled wood pulp to yield paper products. The emissions come mainly from three major operations across the state; three additional facilities contribute smaller amounts. These plants’ emissions will need to be addressed if Maine is to reach its goal of going carbon neutral by 2045. Furthermore, each of these plants is located in an area with an above-average population of low-income residents, according to data assembled by Industrious Labs, an environmental organization focused on the impact of industry. And two are located in areas with a higher-than-average risk of cancer from air toxins, suggesting a correlation between their operations and the incidence of cancer in the area. At the same, the paper and pulp industry remains economically important to Maine, said Matt Cannon, state conservation and energy director for the Maine chapter of the Sierra Club. “It’s got real union jobs — the paper industry is still very important to our community,” he said. Worcester Polytechnic’s drying research center has been working on ways to dry paper, pulp, and other materials using the concentrated energy found in lasers. The lasers Yagoobi’s team is using are not the lasers of the public imagination, like a red beam zapping at alien enemies. Though the lasers are quite strong — they can melt metal, Yagoobi says — they are dispersed over a larger area, spreading out the energy to evenly and gently dry the target material.
This story was first published by Energy News Network . A Massachusetts university is developing technology that aims to use lasers to drastically cut emissions and energy use from Maine’s paper and pulp industry. Worcester Polytechnic Institute recently received a $2.75 million U.S. Department of Energy grant…
This story was first published by Energy News Network.
A Massachusetts university is developing technology that aims to use lasers to drastically cut emissions and energy use from Maine’s paper and pulp industry.
Worcester Polytechnic Institute recently received a $2.75 million U.S. Department of Energy grant to help ready the industrial drying technology for commercial use.
“We are all excited about this — this is potentially a groundbreaking technology,” said Jamal Yagoobi, founding director of the institute’s Center for Advanced Research in Drying.
In Maine, the paper and pulp business generates about 1 million metric tons of carbon dioxide emissions each year, roughly half of the state’s industrial emissions. Much of these emissions result from the process of drying mashed, pressed, and rolled wood pulp to yield paper products. The emissions come mainly from three major operations across the state; three additional facilities contribute smaller amounts.
These plants’ emissions will need to be addressed if Maine is to reach its goal of going carbon neutral by 2045. Furthermore, each of these plants is located in an area with an above-average population of low-income residents, according to data assembled by Industrious Labs, an environmental organization focused on the impact of industry. And two are located in areas with a higher-than-average risk of cancer from air toxins, suggesting a correlation between their operations and the incidence of cancer in the area.
At the same, the paper and pulp industry remains economically important to Maine, said Matt Cannon, state conservation and energy director for the Maine chapter of the Sierra Club.
“It’s got real union jobs — the paper industry is still very important to our community,” he said.
Worcester Polytechnic’s drying research center has been working on ways to dry paper, pulp, and other materials using the concentrated energy found in lasers. The lasers Yagoobi’s team is using are not the lasers of the public imagination, like a red beam zapping at alien enemies. Though the lasers are quite strong — they can melt metal, Yagoobi says — they are dispersed over a larger area, spreading out the energy to evenly and gently dry the target material.